RAID0 using 2x 60GB OCZ Vertex Plus SSD

My latest upgrade to my computer is a pair of OCZ Vertex Plus 60GB SSD. They are running on SATAII and have had many bad reviews but I wanted to give them a try, after all my motherboard has the Z68 chipset. I was running a RAID10 4x Seagate 500GB 7200RPM with 16MB cache as my main drive. Now the plan is to create a RAID0 with the 2 SSD drives and turn the RAID10 into a RAID5 and use it for the data drive.

Here is the ATTO benchmark of the RAID10 before I deleted it.

RAID10_seagate

Now here’s the ATTO benchmark of the RAID0 using the SSD and the WEI score.

RAID0_SSD WEI_RAID0SSD

Based on the numbers I’m getting, it doesn’t seem like a big difference – unless I’m reading it wrong but the read speeds improved from 237MB/s to 261MB/s. My boot up times have improved a lot. Not sure if that has plenty to do with SSD or the clean install of Windows or both.

Here is my ATTO benchmark of the RAID5 that used to be the RAID0.

RAID5_seagate

The write speeds are very low compared to the RAID10 but the read speeds are better.

I’m also using a iStarUSA BPU-124V2-SS 5.25” drive cage. It’s a great little tray that holds 4x 2.5” drives – either SATA or SAS and supports up to SATAIII speeds. It’s very easy to install the drives and it has 2 fans. You only need 1 power cable to power 4 drives. It’s very nice and I highly recommend it if you will use 2.5” drives.

IMG_3508IMG_3509IMG_3510IMG_3511IMG_3512

So far the upgrade was not only inexpensive (because they are only 60GB drives using SATAII interface) but I have noticed improvements in speed and performance. If you don’t have the budget for the newer SATAIII SSDs or larger capacity, try a RAID0 configuration with 2+ smaller SSD drives. Remember though with RAID0, you will not have redundancy. If 1 drive fails, all of the drives in the array will too.

 

Here’s the breakdown of the main hardware I’m using and none are overclocked. Everything is running stock.

CPU: Intel i7 2600K 3.4GHz

Motherboard: Gigabyte Z68MA-D2H-B3

Ram: G.Skills Ripjaws DDR3 1600 16GB 2x (2x4GB)

OS Drive: OCZ Vertex Plus 2x 60GB SSD in a RAID0 (SATAIII port)

Data Drive: Seagate 7200RPM 16MB cache 4x 500GB in a RAID5 (SATAII port)

OS: Microsoft Windows 7 Professional 64bit SP1

 

Update: My computer’s fans started to kick up a little then all of a sudden it would freeze. I thought it was a glitch at first but it happened again within 5 minutes after I rebooted. It may have something to do with the SSD drives and what many are complaining about. The firmware version was 3.02 and the latest is 3.50 so I updated it. We’ll see if it continues to be unstable. Also, after installing the firmware, I redid the ATTO benchmark and got better results.

RAID0_SSD_fw3-50

How to disable OpenCloud Security Malware/Spyware

My aunt’s PC got infected with a trojan virus. She called me and ask if she should use some kind of antivirus to clean her PC. I remember installing Microsoft Security Essentials and as she is describing the interface it didn’t sound familiar. I told her that the so called antivirus itself could be the problem. I came over to check it out and I was right. Somehow she clicked on something (very common) thinking it was something legit and installed it. I couldn’t get a screenshot right off her laptop coz it the trojan cranked up the resources to a point where it was nearly usable so I searched for a screenshot and here’s a sample.

opencloud_security

opencloud_security

I’m mostly on a Mac and when I’m behind my PC at home I usually am protected so I don’t know how to fix these things as well as I used to when I used only PCs. So I Googled and came up found what I thought to be solutions. The websites that came up gave solutions that involved downloading and installing proprietary tools. They also scare you into believing that you must manually edit your registry and if you screw up, you will mess up Windows… which is true, so you have to use their software to automatically remove it. It just didn’t look right.

So I kept researching about OpenCloud. It turns out it’s a malware/spyware. I figured I can use any free spyware software to try and remove it. The 2 that I remember using awhile back are Adaware and Spybot – Search and Destroy. In order to even do anything, you must boot into safe mode with networking by continuing to press the F8 button after your PC has been turned on. Unfortunately, Adaware will not install in safe mode, at least when I tried to it told me that I needed to boot up in normal mode which is not an option because it will execute the trojan. Spybot on the other hand will install in safe mode.

First thing you need to do after install Spybot is to update it just in case there are newer definitions available. Then back up your registry. Afterwards, you can scan for the malware and it should detect it. Once the scanning is complete, have it fix the problems. I would recommend scanning again. In my aunt’s case, the scanning took 19 minutes. It will vary from system to system.

Check the C:\Users\[username]\AppData\Roaming folder. You will folders that were created by OpenCloud Security that should be deleted. You can tell by the weird names and the date modified. Also, you may not see the AppData folder because it’s hidden. You will have to go in your Folder Options and show the hidden files and folders.

Then run “msconfig” and go to the Startup tab. Search for anything suspicious. I disabled “Spyware Doctor” which runs an executable on the desktop. You may also find a bunch of weird named items similar to the folder names in AppData. I disabled them too. It’s probably better to disable all and go through the ones that look familiar and enable them.

You should be able to reboot to normal mode. There may be some shortcuts left behind that you can delete. Now this method only disables the trojan. I don’t believe it’s completely removed. I have yet to find out how to remove it.

As always, make sure you have a back up of your important files regardless of whether you have a problem with your PC or not. Not all solutions will work and can sometimes make things worse. So proceed with caution and the usual I will not be held responsible for any screw ups.

For those who keep getting viruses, malware/spyware, etc. please consider a different operating system like Linux or switch to a Mac. Unless you like having a broken PC or enjoy paying services like the Geek Squad hundreds of dollars.

Headaches with WinXDVD software

I recently tried out Digiarty’s Blu-ray Decrypter because my Makemkv trial has expired. I tried to install the newer version but it still tells me it’s expired. So far it was good during trial. It ripped the 3 movies I tried with it to M2TS files. I then tried to encode it using Arcsoft MediaConverter 7 and I get the stupid “cannot find splitter” error.

mediaconverter7_error

I figured if the decrypter is made by DIgiarty, why not get their own encoder too, so I did. I purchased both decrypter and encoder from Digiarty. Well I was wrong about my assumption. Now I get a file not supported error.

winxhd_error

I contacted their support via email because their phone number is in China. The began to help but now I haven’t heard from them in a few days. I requested for a refunded since their site says there’s a 30 day money back guarantee. I have yet to here a response.

Their DVD software may be good (I haven’t tried but read some good reviews) but based on my experience, their HD stuff isn’t working. It’s too bad. I hope I can get my money back. I want to try other programs.

Virtu trial expired?

I opened my Arcsoft MediaConverter 7 so I can do some more transcoding. To my surprise I was greeted with the following error.

virtu_error

I went to the Lucid Logix website for support just like the error said. I couldn’t find any help nor did I find a way to purchase the full version. All I found was a message that says if I ever need support for this product, to contact the motherboard company. So I go to the Gigabyte website and their support is through email. I haven’t heard back yet but I’m guessing it’s because of the weekend.

I hope I can get this resolved. Using Quick Sync is the biggest reason why I went with the Z68 platform. For now, my CPU usage is close to 100% every time I transcode. Unlike before, with Virtu and Quick Sync, my CPU usage was around 40% and my fans don’t even kick up.

Update: (2011-09-19)

I called Gigabyte’s tech support and was able to get help after several calls. Here are the problems and solution in a nutshell.

  1. My motherboard – Z68MA-D2H-B3 – didn’t come with the Virtu software so I downloaded the one from Lucid Logic directly. According to Gigabyte, I have to use the one that came with the motherboard CD because that version is licensed with them. I have been using the version straight from Lucid Logic’s website which is why it is now expired.
  2. I downloaded and installed the Virtu software from Gigabyte but I still get the error. It turns out that my Bios version (F2) is old and I need to install the current version (F8).

After updating the bios and using Gigabyte’s version, I can now use Virtu once again. Gigabyte support team has been helpful and I will continue to use their products.

Optibay Kit from Maxupgrades.com

I just installed the optibay kit from Maxupgrades.com on my Macbook Pro (MC723LL). The kit cost $89 with the USB enclosure. I called them up before ordering and spoke with one of the sales people for almost half an hour. He knew a great deal about Apple products and he says that he’s one of the machinist that builds the kits. He guarantees that they are aluminum. I gave them a chance and was surprised at the level of quality and shipping/packaging. The package is well wrapped and padded. The parts were in anti-static bags and on top of the that, the tools were included as well as the screwdriver was magnetized to help with assembly. It didn’t come with any instructions on how to remove the optical drive. I tried to look on Youtube but didn’t find what I needed. I have opened other Macs before without any guide. A good rule of thumb is to go slow and be careful. I figured I’ll give this a shot. I took roughly 30 minutes for the whole install so it wasn’t as bad as open up an iMac.

There were 3 screws I didn’t use because the holes didn’t line up. It’s on the SATA adapter to be screwed on the aluminum bracket. It was either screwing the adapter and not having the SATA connectors fully plugged in or not screw it on and have the SATA connectors fully plugged in. I chose the latter. It’s fairly secure even without the screws. Here are some pictures during the unboxing.

IMG_3496

IMG_3497

IMG_3498

IMG_3499

IMG_3500

I also made a video during the installation.